Access Fusion on an STC Desktop in IUanyWare

• Overview
• Before you begin
• Access Fusion
• Learn more

Overview

This guide will walk you through the process of accessing Fusion, the screen reader/magnification software on an STC Desktop in IUanyWare.

Before you begin

You will need to have the latest version of the Citrix Workspace app installed on your computer before using IUanyWare. If Citrix Workspace isn't on your computer, follow the instructions to install the Citrix Workspace app.

If you need to use either a screen reader or magnification on your computer or mobile device to log in and access IUanyWare, be sure to activate it before following the steps below.

Access Fusion

1. Log into IUanyWare.

2. A page with "Welcome to Citrix Receiver" may appear. If it does, click Detect Receiver.
   • If a prompt appears asking to open the Citric Workspace Launcher, select Allow.
3. In the IUanyWare interface, select the Desktops tab.
4. Under "Desktops", navigate to and select STC Lab Desktop.
   Note:

   If you are required to use one of the other STC desktops for your major, select it instead.
5. From the "STC Lab Desktop" menu that appears, select Open.
   • If a prompt appears asking to open the Citric Workspace Launcher, select Allow.
6. One of the following scenarios will happen:
   • If a web browser notification window called "Open Citrix Workspace Launcher?" appears:
     1. Select the "Always allow storefront.iuanyware.iu.edu to open links of this type in the associated app" checkbox.
     2. Select the Open Citric Workspace Launcher button.
   • If the Citrix Viewer STC Lab Desktop window doesn't appear, select the Open link from the STC Lab Desktop Menu again. pnote
     Note:

     Chrome may have downloaded the file needed to execute the STC Desktop, but it didn't trigger the autolauncher. Check under Chrome downloads for a xxxxxx.ICA file and open it to launch the STC Lab Desktop.
   • The Citrix Viewer STC Lab Desktop window will appear on your screen and automatically begin the login process. This can take about 30 seconds to 1 minute.
     Note:

     If you need screen reader access for the next steps, press Ctrl-Windows-Enter to launch Narrator. If you need magnification, press Windows-plus sign (+) to launch Magnifier.
7. In the Citrix Viewer STC Lab Desktop window, press the Windows key, type Fusion 2020, and then press Enter.
8. The Fusion splash screen will appear now.
   • If you launched Narrator, press Ctrl-Windows-Enter to exit at this time.
   • If you launched Magnifier, press Windows-Escape to exit at this time.
9. Next, you should see a "Welcome to Fusion" screen with some introductory information. Read it and then click OK.
10. The Fusion startup wizard window will appear next:
    1. Leave "Enable Fusion in the Windows logon prompt" unchecked.
    2. Leave "Start Fusion automatically when Windows starts" unchecked.
    3. Click Next.
    4. Leave "Enable Fusion Error Reporting" unchecked.
    5. Click Finish.
11. The JAWS Fusion Startup wizard will appear after that:
    1. On the first screen, leave "Participate" unchecked and then select the Next button.
    2. On the speech settings screen, pick your options and then select the Next button.
    3. On the "Common Options" screen, pick your settings and then select the Next button.
    4. On the "Braille Translation Settings" screen, pick your options and then select the Next button.
    5. On the "Braille Settings" screen, pick your options and then select the Finish button.
12. Fusion is now running the STC workstation.

If you experience issues using Fusion, contact your campus Support Center.

Learn more

• For more on Fusion, see the Fusion documentation.
• For some short demo video tutorials, see the Fusion Videos playlist on YouTube.