Use the Meta Quest HMD on the IU wireless network

• Connect the Meta Quest HMD to Wi-Fi
• Cast Meta Quest HMD
• Learn more

---

Connect the Meta Quest HMD to Wi-Fi

1. Power on the device: Press and hold the power button on the side of the Meta Quest HMD until the Meta logo appears.
2. Access Quick Settings on the bottom left:
   1. Navigate to the "Quick Settings" menu by clicking the trigger button on your right controller.
   2. Select Quick Settings from the menu.
3. Connect to Wi-Fi:
   1. Inside the "Settings" menu, locate and select Wi-Fi.
   2. Another window will open where you will be able to select which network you want to connect to.
4. Select a network: For connecting to Wi-Fi on any IU campus, select the eduroam network.
5. Connect to eduroam Wi-Fi: Another window will pop up with the eduroam settings. When connecting the headset to the eduroam Wi-Fi for the first time, configure as follows:
   1. EAP Method: Select PEAP from the drop-down menu.
   2. Phase 2 authentication: Choose MSCHAPV2 from the drop-down.
   3. CA Certificate: Select Use System Certificates from the drop-down menu. Selections for "Online Certificate Status" and "Domain" will show up after making this selection.
   4. Online Certificate Status: Choose Do Not Verify from the drop-down menu.
   5. Domain: ads.iu.edu
   6. Identity: Your IU email address
   7. Anonymous Identity: Leave blank
   8. Password The IU password attached to your email
   9. Once finished, select Connect in the bottom right of the window.
6. Verify the connection:
   1. Ensure that the Meta Quest HMD is successfully connected by checking for the Wi-Fi symbol in the status bar.
   2. If the Wi-Fi symbol is lit up and the headset shows that eduroam is connected, you are ready to use your Meta HMD.

Cast Meta Quest HMD

1. On your phone, tablet or computer: Ensure that both the Meta Quest HMD and the device the headset will cast to are connected to the same Wi-Fi network. Make sure that the Oculus app on your casting device is up to date for optimal performance. Casting may have some latency, and the quality may depend on your Wi-Fi connection.
2. Prepare to cast the HMD:
   1. Turn on your Meta Quest HMD and put on the headset.
   2. Put your headset on and press / on your controller to open the universal menu.
   3. Go to "Camera" settings and select the Cast option in the upper left of the window to enable casting.
3. Choose where to cast the HMD:
   1. The next prompt will ask you to select the device you want to cast to (for example, your phone, computer, or tablet).
   2. Once you've chosen the casting device, look for a red dot in the upper right of your vision to confirm the casting on your Meta Quest HMD.
4. View on computer or phone/tablet:
   • Computer: Open your browser, go to oculus.com/casting, and log in with your credentials. Confirm the connection and start casting.
   • Phone or tablet: Open the Oculus App and confirm the connection to start casting.
5. End casting session: From your Meta Quest headset, select the Camera button again in the Main toolbar. Then select Cast again to stop casting.

Learn more

For more information, contact Jason Peercy, University Library VR Coordinator (japeercy@iu.edu), or Sarth Kulkarni (sakulk@iu.edu).