Connect to the IU wireless network in Fedora

Note:
eduroam is replacing IU Secure as the default wireless network for students, faculty, staff, and affiliates on all IU campuses, and you can begin using it now. UITS will retire IU Secure on January 28, 2020.
Note:
The eduroam and IU Secure authentication servers use USERTrust RSA as their root certificate authority. You need a valid USERTrust RSA root certificate in Privacy-Enhanced Mail (PEM) format to connect to either network. The certificate is commonly installed on most devices by default.

To connect to eduroam or IU Secure:

  1. Click the NetworkManager applet (a pair of superimposed monitors, typically in the upper bar on the right), and then select the network name (either eduroam or IU Secure). The "Wireless Network Secrets Required" window will appear.
  2. Configure the settings as follows:
    • Next to "Wireless Security:", select WPA & WPA2 Enterprise.
    • Next to "Authentication:", select Protected EAP (PEAP).
    • Leave the "Anonymous Identity:" field blank.
    • Click the button next to "CA Certificate:", and then browse to the certificate bundle file (/etc/pki/tls/certs/ca-bundle.crt).
    • Next to "PEAP Version:", choose Version 0.
    • Make sure "Inner Authentication:" is set to MSCHAPv2.
    • Next to "User Name:" enter your primary IU email address if you are using eduroam, or your IU username if you are using IU Secure. Next to "Password:", enter your IU passphrase.

      Do not check Show password, as it will display your passphrase in clear text.

  3. Click Connect. If the connection fails, Wireless Network Secrets Required will reappear. Repeat step 2 to verify the settings.

When you successfully connect, you'll see a series of blue bars of increasing height in place of the super-imposed monitors.

At Indiana University, for personal or departmental Linux or Unix systems support, see Get help for Linux or Unix at IU.

This is document axsv in the Knowledge Base.
Last modified on 2019-06-25 14:47:00.

Contact us

For help or to comment, email the UITS Support Center.